Custom Electronics Systems, Inc.
455 FORUM PARKWAY RURAL HALL, NORTH CAROLINA
27045
PHONE: (336) 969 2411 FAX: 336 969 2412
EMAIL: INFO@DRAFTRANGE.COM
CES 287 Triple Display Proportional Controller
FEATURES
Setpoint, Process, and Output Displays
Set and Forget CONTROLLERS
Smooth, Tight, Stable Control Action
Cascadable
Internal Loop Supply
Easy Tuning
Six Year Warraanty
GENERAL DESCRIPTION
The CES Model 287 is a 3 mode controller with independent gain, rate and reset functions with process,
set point, and output indicators. The controller has an automatic compensated offset (reset) with adjustable
rate circuit which minimizes process error. During proportional plus reset control, the circuit senses the
approach of the process signal to the set point and starts corrective action, thereby eliminating process
signal overshoot. The rate control is effective over the entire range.
The CES 287 Controller is based on the same proven technology as the
CES 270 controller With the addition of triple displays. This allows the user to monitor the process,
setpoint and output while the controller is operational. The controller section of the 287 was designed for
the special requirements of low pressure and flow application and other fast action processes.
The 287 Controller can be operated either in the Automatic Control Mode
or the Output can be set to any desired point in the Manual Mode. To increase flexibility of the unit the
user can select either local or remote setpoint control as well as Direct or Indirect action. The unit also
has a built in hold circuit that can be used to prevent the unit from hunting during normal disturbances in
the process. An example would be while the doors are being opened and closed during automotive paint
booth applications.
The 287 can be operated as a stand alone controller,cascaded or controlled
from a remote source such as a computer. The input and output 4-20 mA loops are sourced by the 287
eliminating the need for external power supplies.
|